HPC™ Coating is a ceramic based, water-borne insulating coating, designed to insulate in extreme heat situations, and can be used both as a base coat / primer and build coats to achieve the desired thickness. HPC™ Coating provides for safer surfaces and overcomes all the downfalls of conventional insulation.
- Apply directly to hot surfaces to immediately reduce the surface temperature.
- Add build coats as needed to reduce the temperature to the desired level.
- Easy to apply. Overcomes downfalls of conventional pipe wrapping.
- Direct-to-metal coating on properly prepared steel.
- Non-flammable and non-toxic.
- Does not absorb moisture or lose insulation value, like fibreglass.
- Long-term cost effectiveness.
- Reduction of external temperature of hot surfaces as an aid to worker safety.
- Reduction of heat loses and resulting energy savings.
- Reduction of condensation in situations.
- HPC™ Coating is applied repeatedly until the thickness desired for heat insulation is obtained.
- Type: thermo ceramic substance
- Coverage: cca 0,45 m2/Liter
- As primer: 20 sq.ft./gallon giving 1.57 mm thickness as primer
- Dry times: 10 minutes as primer over hot surface, then build up as needed. 24 hours to set
- Fully cures: in 24 hours
- Weight: 0,6 kg / 1 liter
- Elongation: 125%
- PH: 8.5-9.0
- VOC level: 14 grams /liter
- USDA approved
- Do not use for underwater applications.
- HPC™ Coating is light yellow in color and rough in texture, and cannot be tinted or coloured.
- Not recommended as the only fire protection material to be used in residential or industrial construction.
- Do not use as floor coating.
- Do not use externally as this coating is not UV protected. For external use overcoat with Super Therm®, Enamo Grip, or Rust Grip®.
