Rust Grip® is a metallic-based, moisture-cure polyurethane encapsulating coating that will coat over most surfaces to seal them up against further corrosion, weathering, and physical wear. Rust Grip® is a three-coats-in-one system that acts as a primer, intermediate, and topcoat in one.
In its design, Rust Grip® will apply over a surface and immediately find the pores of the surface and immediately fill them. Within an hour of application, it will begin its cure cycle. During this cure cycle, it will pull moisture from the air and begin to microscopically swell within the individual pores as it hardens. This process anchors the coating and seals against any possibility of air, moisture, or any minerals attacking the surface causing any further corrosion of any kind.
- Excellent for minimally prepared surfaces, ie. No sandblasting
- It is not necessary to sand the material to the bare metal.
- The surface can be minimally prepared. Only loose rust and colour must be removed.
- Protects steel, aluminum, concrete, wood, fibreglass, lead-based paints, polyurethane foam, and other coatings.
- Extremely tough, it makes an excellent floor coating.
- Designed to withstand acids, salts and caustics with no loss of strength.
- Submergible in 100% nitric acid without any effects.
- Rated as a Class A fire coating. In case of fire, Rust Grip® will help to prevent spread of, and will not contribute to, the burn.
- Certified by the EPA for encapsulation of lead-based paints and asbestos.
- Rust Grip® can be used separately without topcoat or as a primer and anti - corrosion coating under insulating ceramic coatings or under tinted coatings (besides silver colour also other colours if required).
- Rust Grip® is originally designed for metal surfaces protection, but demonstrates excellent adhesion to wood, concrete, fiberglass, foams and many other substrates.
- Its adhesion ability extraordinarily protects all cures materials before moisture.
- Prevents mold and mildew from forming.
- USDA approved for use in and around food preparation areas.
- Rust Grip® is UV-controlled and is not affected by hostile environments.
- 15+ year lifespan on roofing under normal conditions.
- Corrosion and weathering protection.
- Overcoat rusted areas to stop and control corrosion activities. Rust Grip® will seal out any contact with moisture and air or chemical pollutants that breed corrosion activity.
- Prime metal before over-coating.
- Prevention of corrosion.
- Protect floors to prevent wear and damage.
- Anti-slip coating when combined with aggregates, for use around high traffic areas.
- Protection from acid splash or pooling. It will not allow acids to penetrate to affect the surface.
- Encapsulate and seal lead-based paints, asbestos, or other hazardous materials.
- Type: polyurethane
- Coverage: cca 7.3 sq.m. / l (clean surface)
cca 4.9 sq.m. / l (rusty surface) - Dry time: 2 hours to touch
Overcoat within 4 hours - Full cure: 10 days
- Cures by reacting to moisture in the air
- Weight: 1,1 kg per 1 liter
- Surface tensile strength: 6,780+ psi
- Vehicle type: aromatic polyurethane
- Shelf life: 1 year
- VOC level: 418 grams /1 liter
- Impact resistance: 200+ psi front / 160+ psi back
- Transmission of electrical currents: doesn't show any conduction until 18 volts without corrosion
Can withstand temperatures to 150°C - Viskosity: 28-40 seconds/ number 4 ( 24°C)
- Silver / grey in colour, it cannot be tinted due to the metallics in the formula. (And the metallics is what makes the product so strong)
- Not for use over wet or moist surfaces. Surfaces must be completely dry.
- Not for use in situations of constant underwater exposure.
- Not recommended for use around high ammonia levels.
- Not for use on food preparation surfaces that are in direct contact with foodstuffs.
